LACQUER COATING

  • amazon
  • flipkart
  • snapdeal
  • paytm
  • shopclues
  • ebay

NEOPROOF PROTECTIVE LACQUER COATING FOR MEMBRANES

NEOPROOF PROTECTIVE LACQUER COATING FOR MEMBRANES


NEOPROOF RC 233 is a modified U. V. resistant clear lacquer to be applied over elastomeric liquid membrane coatings for extra durability, gloss, dust/dirt and water repellency. This product is just a protective coating and does not have any waterproofing property. It only protects pre applied membrane coating from immediate / short term damage from dust and UV. Apply by brush or airless spray equipment. Normally single coat is enough but if required you can put 2 coats. Allow recoating interval of approx 1 hr. Coverage is around 120 sq. ft per litre per coat. Will be higher if spraying method is used.

NEO’S CLEAR LACQUERS

NEO’S CLEAR LACQUERS


NEOGUARD 5150 is a 2 part, air drying, polyamide cured Epoxy Clear lacquer with good chemical & salt Resistance. Recommended as Topcoat on epoxy primer/True coat on metal Surfaces. Available in Glossy / Semi glossy finish, the product is applied by brush / spray. Coverage–14.6 -17.6 sq m per litre per coat for DFT of 25-30 microns. Mix the 2 parts in the given ratio & apply. Pot life–4 hrs, Touch Dry–30 mins & Hard Dry–12 hrs. Find uses in OEM’s as well as for process industries like fertilizers, refineries, chemical & other plants, pipelines, structural steel, etc.

NEOSHIELD 6220 is a 2 part air drying Aliphatic isocyanate based PU clear lacquer coating for best gloss retention, chemical resistance & protect from UV degradation. It is recommended as topcoat on Epoxy Primer or PU Primer/as a True coat on MS surface for OEM’s & Auto ancillaries as well as for process industries like refineries, chemical etc. Available in Glossy / Semi glossy finish the product is applied by brush / spray. Coverage –12.16 -14.6 sq m per ltr per coat for DFT of 25-35 microns. Mix 2 parts in the given ratio & apply. Pot life – 3 hrs, Touch Dry – 30 mins & Hard Dry – 6 hrs.