pu paints

PU PAINTS

  • amazon
  • flipkart
  • snapdeal
  • paytm
  • shopclues
  • ebay

NEOSHIELD PU Paints are 2 part polyurethane based top coat offering good resistance to chemical, UV. These products are designed to offer best gloss retention. The product has got excellent adhesion strength and also offers a balanced aesthetic and corrosion protection. NEOSHIELD PU Paints are available in Clear / High Glossy / Semi Glossy varieties. Special products with non yellowing features are also available. These products cure at Room temperature and provides excellent flexibility, toughness, good abrasion, chemical & UV resistance.

Surface Preparation:Abrasive blasting to Sa 2 ½ Swedish standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be cleaned to St-2/St-3. The surface should be absolutely dry, moisture and oil free before primer application. And for Application on Primer scuff with 100 no type’s emery paper for proper bondin

Application Method: Stir the Base part thoroughly. Mix base and Hardener as per our recommended ratio, by volume, Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Add suggested Thinner into mix, if required, depending on application method, and stir gently for few minutes. Stain the paint through nylon filter cloth of 300 mesh size and apply uniformly over the surface. All equipment used for above should be properly cleaned. Apply By Brush/By Conventional spray.

GRADES WITH TECHNICAL SPECIFICATIONS

NEOSHIELD 6200

Product NEOSHIELD 6200 -
PU CLEAR ALIPHATIC
Description 2 Parts air drying Acrylic Aliphatic isocyanate based high gloss P.U lacquer coating for exterior non yellowing applications
Solids 50
DFT (microns) 20-25
Coverage (Sq. Mt. / litre) 20-25
Pot Life 4 hrs
Over Coating Interval (Min) 24 hrs
Over Coating Interval (Max) 7 Days
Drying time @ 30oC Surface dry-40-50 Mins.
Tack free-5-6 Hrs.
Harddry-24 Hrs.
Use Thinner PUT-666

 

NEOSHIELD 6220

Product NEOSHIELD 6220 -
PU PAINT ALIPHATIC
Description 2 Parts air drying Acrylic Aliphatic isocynate based high gloss P.U coating for exterior application.
Solids 45
DFT (microns) 30-35
Coverage (Sq. Mt. / litre) 12.8-15
Pot Life 4 hrs
Over Coating Interval (Min) 10 hrs
Over Coating Interval (Max) 24 hrs
Drying time @ 30oC Surface dry-30-40 Mins.
Tack free-4-5 Hrs.
Harddry-20 Hrs.
Use Thinner PUT-666

 

NEOSHIELD 6250

Product NEOSHIELD 6250 -
PU CLEAR AROMATIC
Description 2 Parts air drying Acrylic Aromatic isocynate based high gloss P.U lacquer coating for interior application, it can be used for exterior applications where yellowing is not an issue.
Solids 50
DFT (microns) 20-25
Coverage (Sq. Mt. / litre) 20-25
Pot Life 4 hrs
Over Coating Interval (Min) 24 hrs
Over Coating Interval (Max) 7 Days
Drying time @ 30oC Surface dry-40-50 Mins.
Tack free-5-6 Hrs.
Harddry-24 Hrs.
Use Thinner PUT-666

 

NEOSHIELD 6260

Product NEOSHIELD 6260 -
PU PAINT AROMATIC
Description 2 Parts air drying Acrylic Aromatic isocynate based high gloss P.U coating for interior applications, the coating has a tendency to yellow on exterior exposure.
Solids 45
DFT (microns) 30-35
Coverage (Sq. Mt. / litre) 12.8-15
Pot Life 4 hrs
Over Coating Interval (Min) 24 hrs
Over Coating Interval (Max) 7 Days
Drying time @ 30oC Surface dry-30-40 Mins.
Tack free-4-5 Hrs.
Harddry-20 Hrs.
Use Thinner PUT-666

 

NEOSHIELD 6280

Product NEOSHIELD 6280 -
PU PAINT AROMATIC
Description 2 Parts air drying Polyester Aromatic isocynate based high gloss P.U coating for interior applications where flexibility is a prime requirement, the coating has a tendency to yellow on exterior exposure.
Solids 45
DFT (microns) 30-35
Coverage (Sq. Mt. / litre) 12.8-15
Pot Life 4 hrs
Over Coating Interval (Min) 24 hrs
Over Coating Interval (Max) 7 days
Drying time @ 30oC Surface dry-30-40 Mins.
Tack free-4-5 Hrs.
Harddry-24 Hrs.
Use Thinner PUT-666

NEOSHIELD 6290

Product NEOSHIELD 6290 -
PU PAINT FDS
Description 2 Parts air drying Polyester Aromatic isocynate based high gloss P.U coating for interior applications where flexibility & fast drying is a prime requirement, the coating has a tendency to yellow on exterior exposure.
Solids 45
DFT (microns) 30-35
Coverage (Sq. Mt. / litre) 12.8-15
Pot Life 4 hrs
Over Coating Interval (Min) 24 hrs
Over Coating Interval (Max) 7 Days
Drying time @ 30oC Surface dry-20-30 Mins.
Tack free-3-4 Hrs.
Harddry-18 Hrs.
Use Thinner ST-400

 

NEOSTIPPLE 9150

Product NEOSTIPPLE 9150 -
PU STIPPLE FINISH
Description 2 pack, air drying, Anti corrosive pigment containing, solvent borne coating.stipple finish type antique coating with good chemical resistance.
Solids 50
DFT (microns) 30-40
Coverage (Sq. Mt. / litre) 12.5-16.5
Pot Life 4 hrs
Over Coating Interval (Min) -
Over Coating Interval (Max) -
Drying time @ 30oC Surface dry-5-10 mins.
Tack free-3-4 Hrs.
Hard dry-18 Hrs.
Use Thinner PUT-666

 

APPLICATIONS


Product Code RECOMMENDED USE
NEOSHIELD 6200 It is recommended as a clear Coat over Epoxy Paint/PU Paint for Excellent gloss, color retention and protect the film from UV exposure. it is recommend to use for exterior applications where exterior durability is a concern. it will enhance overall properties of coating.
NEOSHIELD 6220 It is recommended to use as a topcoat over Epoxy Primer or PU Primer to achieve excellent gloss & colour retention, excellent outdoor durability, resistant to abrasion, chemical and UV light with smooth finish. Recommended for Auto OEM’s & refinishes, auto ancillaries, heavy machineries,industrial equipments as well as for process industries like, refineries, chemical and other industries. It is especially recommended for outdoor applications and premium interior applications.
NEOSHIELD 6250 It is recommended as a clear Coat over Epoxy Paint/PU Paint for Excellent gloss, and levelling. the coating will discolor when exposure to UV light. it is especially recommended for interior applications and exterior applications where discoloration is not a criteria. It will enhance overall properties of coating except resistant to UV light.
NEOSHIELD 6260 It is used as a topcoat over Epoxy Primer or PU Primer to achieve excellent gloss & levelling, resistant to abrasion & chemical and will discolor when exposure to UV light. Recommended for interior applications like premium furnitures, musical instruments etc. and in exterior applications where discoloration is not important as compare to performance properties. Recommended to coat auto ancillaries, heavy machineries,industrial equipments as well as for process industries like, refineries, chemical and other industries. It is especially not recommended for Auto OEM's & refinish applications.
NEOSHIELD 6280 It is recommended as a economical grade where price is a concern to use P.U. it can not perform as good as P.U. It is used as a topcoat over Epoxy Primer or PU Primer to achieve excellent gloss & levelling, resistant to abrasion & chemical and will discolor when exposure to UV light. Recommended for interior applications like furnitures, musical instruments etc. and in exterior applications where discoloration is not important as compare to performance properties. Recommended to coat auto refinishes, auto ancillaries, heavy machineries,industrial equipments as well as for process industries like, refineries, chemical and other industries. It is especially not recommended for Auto OEM's.
NEOSHIELD 6290 It is recommended as a economical grade where price is a concern to use P.U. it can not perform as good as P.U. It is used as a topcoat over Epoxy Primer or PU Primer to achieve excellent gloss & levelling, resistant to abrasion & chemical and will discolor when exposure to UV light. Recommended for interior applications like furnitures, musical instruments etc. and in exterior applications where discoloration is not important as compare to performance properties. Recommended to coat auto refinishes, auto ancillaries, heavy machineries,industrial equipments as well as for process industries like, refineries, chemical and other industries. It is especially not recommended for Auto OEM's.
NEOSTIPPLE 9150 It is recommended as a Unicoat Topcoat on M.S Surface for OEM’s as well as for steel furniture, antique finish along with performance for metal cupboard, lockers, outer body of electric device equipment’s, chemical exposure.