Speciality Paints

Description:

Neo Speciality paints are specially designed products made for meeting very critical requirements. The products that include in this category are Heat Resisting Paints, Anti graffiti paints , Reflective Paints etc. Heat resisting paints are speciality aluminium paints that are capable of withstanding high temperature ranging from 200 deg C to 600 deg C . Anti graffiti paints are Top Coats over Epoxy Paint/PU Paints for achieving Excellent gloss, Scratch Resistance. They offer easy dust & stain removable properties from substrates with simple water washing. Reflective Paints are transparent coating that increase the visibility of the substrate upon light incidence thereby adding aesthetic look to the substrate.


Surface Preparation:

The surface of steel, MS should be cleaned to St-2/St-3. The surface should be absolutely dry, moisture and oil free before application.


Application Method:

Aluminium Paint - Stir the Base part thoroughly. Mix base and Paste as per our recommended ratio, by volume. Stir the mix gently to attain homogeneity and allow to soak for 30 min to 1 hour for better brightness of paste. Strain the paint through nylon filter cloth of 100 mesh size and apply uniformly over the surface. All equipment used for above should be properly cleaned.

Reflective Coating - Apply a base coat of same colour or different by spray, brush or roller and allow 24 hour before application. Coating cured by heat is difficult to remove while air dried coating can be removed easily by solvents or by stripper. Ensure containers air tight to prevent moisture contact.


Shop at:

Product Grades:
  • NEO HR 9010
  • NEO HR 9020
  • NEO HR 9050
  • NEO HR 9060
  • NEO GRAFFITI 9240
  • NEO FD 9300
Product Code RECOMMENDED USE
NEO HR 9010 It is recommended as a heat resisting coating for chimney, exhaust pipes, engine parts. exterior of Storage tanks, muffles etc. can be used as a primer, intermediate coat or top coat
NEO HR 9020 It is recommended as a heat resisting coating for chimney, exhaust pipes, engine parts. exterior of Storage tanks, muffles etc. can be used as a primer, intermediate coat or top coat
NEO HR 9050 It is recommended as a heat resisting coating for chimney, exhaust pipes, engine parts. exterior of Storage tanks, muffles etc. can be used as a primer, intermediate coat or top coat
NEO HR 9060 Suitable for heat resistant applications on the surface of steam/gas turbine components, boiler, chimney & other machine parts which are exposed to a operating temperature of 550*C as well as to protect moderate corossion.
NEO GRAFFITI 9240 It is recommended as Top Coats on Epoxy Paint/PU Paints for Excellent gloss, Scratch Resistance, Easy dust removable from substrates, good stain resistance and easy to remove stain with simple water washing and good color retention and protect paint surface from chemical and direct sun light, so recommend to use at exterior area of OEM’s and for Auto ancillaries as a finish coat topcoat like bus body, car body, fan coating, railway coaches. Also recommended to premixing in PU paints so that no need to apply Clear coat without suffering of properties. For that premixing application contact to Neo’s Concern Person.
NEO FD 9300 This coating is recommended to increase the visibility of the substrate and to give pleasing & attractive look to the substrate. Application areas including Industrial labelling, sign boards, pedestal identification, stair case, racks and shelves identification where visibility is critical.
Product Code description Solids DFT (microns) Coverage (Sq. Mt. / litre) Pot Life Over Coating Interval Drying time @ 30oC Use Thinner
Min Max
NEO HR 9010 -
ALUMINIUM PAINT D.C-21
Single pack, air drying, heat resistance coating (upto 200*C)containing Alluminium pigment. 30 15-20 15-20 NA 24 hrs 7 Days Surface dry-3-4 Hrs.
Hard dry-24 Hrs.
GPT-100 / GPT-106
NEO HR 9020 -
ALUMINIUM PAINT D.C-22
Single pack, air drying, heat resistance coating (upto 200*C)containing Alluminium pigment. 30 15-20 15-20 NA 24 hrs 7 Days Surface dry-3-4 Hrs.
Hard dry-24 Hrs.
GPT-100 / GPT-106
NEO HR 9050 -
QD ALLUMINIUM PAINT
Single pack, air drying, heat resistance coating (upto 250*C)containing Alluminium pigment. 30 15-20 15-20 NA 24 hrs 7 Days Surface dry-3-4 Hrs.
Hard dry-24 Hrs.
GPT-100 / GPT-106
NEO HR 9060 -
HR ALLUMINIUM PAINT-550*C
Single pack Silicone resin containing,air drying, Alluminium pigment based paint to withstand temperature upto 550*c (indirect heat). 32 15-20 16-21 NA 24 Hrs 7 Days Surface dry-30-40 mins.
Hard dry-15 Hrs.
ST-400
NEO GRAFFITI 9240 -
ANTI GRAFFITI
Two pack, air drying, easy dust remover,good in anti scratching, and graffity. 36 25-30 12-14.4 4 NA NA Surface dry-30-40 mins.
Tack free-3-4 Hrs.
Hard dry-18 Hrs.
PUT-666
NEO FD 9300 -
FD Reflective Finish
single component, air drying Paint contains reflective pigments for top coat. 40 25-30 13-16 NA 24 hrs 7 Days Dry to touch-5-8 mins.
Tackfree-3-4 Hrs.
Harddry-24 Hrs.
-


* COLOURS AVAILABLE - Metalic Alluminium
* NEO GRAFFITI 9240 COLOUR - NA
* NEO FD 9300 COLOUR - Yellow, Red, Green, Silver

Get Free Estimate : (+91) 260 6543074 / 2453357

Copyright © 2013. All Rights Reserved | Neo-Pack Plast

Designed & Developed By Xira Infotech Logo