NEOGUARD Epoxy Paints are 'Epoxy' based top coat offering good resistance to water and humidity. These products are designed to offer superior corrosion protection to mild steel substrates. The product has got excellent adhesion strength and also offers a balanced aesthetic and corrosion protection. NEOGUARD epoxy Paints also show good Chemical & Salt Resistance. Neo Guard Epoxy Paints are available in High Glossy / Semi Glossy varieties. Special products with accelerated curing speed are also available.
ZINCGUARD,a two components high performance epoxy metallic zinc rich primer, specially formulated for excellent corrosion resistance for high performance system.
Abrasive blasting to Sa 2 ½ Swedish standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be cleaned to St-2/St-3. The surface should be absolutely dry, moisture and oil free before primer application. And for Application on Primer scuff with 100 no type’s emery paper for proper bonding and performance.
Stir the Base part thoroughly. Mix base and Hardener as per our recommended ratio, by volume, Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Add suggested Thinner into mix, if required, depending on application method, and stir gently for few minutes. Stain the paint through nylon filter cloth of 100 mesh size and apply uniformly over the surface. All equipment used for above should be properly cleaned. Apply By Brush/By Conventional spray.
General purpose coating for steel which resists water, mild chemical & abrasion. It is recommended as Topcoat on epoxy primer/Trucoat on M.S Surface for OEM’s as well as for process industries like fertilizers, refineries, chemical and other plants. It can also be applied in diverse areas of tank exteriors, equipment’s, pipelines, structural steel, etc. Not to be used for immersion application.
Product | Description | Solids | DFT (microns) | Coverage (Sq. Mt. / litre) | Pot Life | Over Coating Interval | Drying time @ 30oC | Use Thinner | |
---|---|---|---|---|---|---|---|---|---|
Min | Max | ||||||||
NEOGUARD 5150 - EPOXY PAINT SEMI GLOSSY |
2 Parts air drying, Epoxy polyamide cured finish paint. | 40 | 30-35 | 11.4-13.3 | 4 hrs | 24 hrs | 7 Days | surface dry-40-50 Mins. Tack free- 4-5 Hrs. Hard dry- 24 Hrs. |
ET-501 |
NEOGUARD FR 5160 - EPOXY FDS PAINT |
2 Parts air drying, Epoxy spl. polymer cured finish paint. | 40 | 30-35 | 11.4-13.3 | 4 hrs | 24 hrs | 7 Days | surface dry-40-50 Mins. Tack free- 4-5 Hrs. Hard dry- 24 Hrs. |
ET-501 / ST-400 |
NEOGUARD HB 5170 - EPOXY HB PAINT |
2 Parts air drying, High build, Epoxy polyamide cured finish paint. | 40 | 50-60 | 6.6-8 | 2 hrs | 24 hrs | 7 Days | surface dry-80-90 Mins. Tack free- 6-7 Hrs. Hard dry- 24 Hrs. |
ET-501 |
NEOGUARD FD 5180 - EPOXY PAINT FD |
2 Parts air drying, special polymer based cured finish paint. | 40 | 30-35 | 11.4-13.3 | 4 hrs | 24 hrs | 7 Days | surface dry-40-50 Mins. Tack free- 4-5 Hrs. Hard dry- 24 Hrs. |
ST-400 / ST-405 |
NEOGUARD 5200 - EPOXY LACQUER |
2 Parts air drying clear, non yellowing epoxy clear coating | 48 | 25-30 | 16-19 | 4 hrs | 24 hrs | 7 Days | surface dry-80-90 Mins. Tack free- 6-7 Hrs. Hard dry- 24 Hrs. |
ET-501 |
NEOGUARD 5251 - EPOXY PAINT High GLOSS |
2 Parts air drying, Epoxy polyamide cured finish paint. | 40 | 30-35 | 11.4-13.3 | 4 hrs | 24 hrs | 7 Days | surface dry-40-50 Mins. Tack free- 4-5 Hrs. Hard dry- 24 Hrs. |
- |
NEOGUARD FD 5203 - EPOXY PAINT FD GLOSSY |
2 Parts air drying, special polymer based cured finish paint. | 40 | 30-35 | 11.4-13.3 | 4 hrs | 24 hrs | 7 Days | surface dry-40-50 Mins. Tack free- 4-5 Hrs. Hard dry- 24 Hrs. |
- |
COAL TAR EPOXY | Seamless coating with better protection, For interior and exterior use with High strength & better flexibility. | 87 | 100 – 150 µm | 7 sq.mtr/ltr @ 100 µm THICK | 3 Hrs | - | - | surface dry - 4 – 5 Hrs. Hard dry- 24 hrs. |
ET-509 |
ZINCGUARD 900 | A two components high performance epoxy metallic zinc rich primer, specially formulated for excellent corrosion resistance for high performance system. | 90 +/- 5% | 50-75 µm | 11 sq.mtr/ltr @ 50 µ DFT | 2-3 Hrs | - | - | Tack Free Dry – 10 Min Max HARD DRY: 5 Hrs Full cured – 7 days |
|
ZINCGUARD 960 | A two component solvent based moisture curing inorganic zinc silicate coating, specially formulated for excellent corrosion resistance for high performance system | 90 +/- 5% | 50-75 µm | 11 sq.mtr/ltr @ 50 µ DFT | 2-3 Hrs | - | - | Tack Free Dry – 10 Min Max HARD DRY: 5 Hrs Full cured – 7 days |
|
* COLOURS AVAILABLE - IS / RAL / PANTONE / CUSTOMIZE |
Get Free Estimate : (+91) 7228862277 / 7227857700 / 7226077889